The RGB Color Codes for Leidos Holdings are (31, 22, 70), (133, 15, 136), and (189, 190, 188) for yankees blue, mardi gras, and x11 gray. The RGB Color Scheme of the Leidos Holdings brand can be seen in the table below
Leidos Holdings Logo Colors
The official colors of Leidos Holdings are yankees blue, mardi gras, and x11 gray.
Leidos Holdings logo colors represent sophistication, sincerity, and luxury. The Leidos Holdings color scheme can be used for design projects and purposes. Leidos Holdings Color codes and schemes for Pantone, HTML Hex, RGB and CMYK can be found below.
Leidos Holdings Primary Logo Colors
The primary colors of Leidos Holdings can be found in the table below.
YANKEES BLUE
PANTONE: PMS 275 C
HEX COLOR: #1F1646
RGB: (31, 22, 70)
CMYK: (0.557, 0.685, 0.0, 0.725)
MARDI GRAS
PANTONE: PMS 2355 C
HEX COLOR: #850F88
RGB: (133, 15, 136)
CMYK: (0.022, 0.889, 0.0, 0.466)
X11 GRAY
PANTONE: PMS COOL GRAY 4 C
HEX COLOR: #BDBEBC
RGB: (189, 190, 188)
CMYK: (0.005, 0.0, 0.01, 0.254)
| Color Name | RGB Color Code | CMYK Color Code | Pantone Color Code | HEX Color Code |
|---|---|---|---|---|
| Yankees blue | (31, 22, 70) | (0.557, 0.685, 0.0, 0.725) | PMS 275 C | #1F1646 |
| Mardi gras | (133, 15, 136) | (0.022, 0.889, 0.0, 0.466) | PMS 2355 C | #850F88 |
| X11 gray | (189, 190, 188) | (0.005, 0.0, 0.01, 0.254) | PMS COOL GRAY 4 C | #BDBEBC |
Table of Contents
- 1 Leidos Holdings Primary Logo Colors
- 2 Leidos Holdings Hex Color Codes
- 3 Leidos Holdings Color Codes RGB
- 4 Leidos Holdings Color Scheme CMYK
- 5 Leidos Holdings Pantone Colors
- 6 What are the Logo Colors of Leidos Holdings?
- 7 What are Other Similar Brands that Use Same Color Schemes as Leidos Holdings?
Leidos Holdings Hex Color Codes
The Hex Color Codes for Leidos Holdings are #1F1646, #850F88, and #BDBEBC for yankees blue, mardi gras, and x11 gray. The Hex Color Scheme of the Leidos Holdings brand can be seen in the table below.
| Color Name | HEX Color Code |
|---|---|
| Yankees blue | #1F1646 |
| Mardi gras | #850F88 |
| X11 gray | #BDBEBC |
Saved searches
Cancel Create saved search
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session. You switched accounts on another tab or window. Reload to refresh your session.
Aircoookie / WLED Public
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
HEX color entry field #506
CaptainUns opened this issue Dec 23, 2019 · 8 comments
CaptainUns opened this issue Dec 23, 2019 · 8 comments
Labels
Milestone
CaptainUns commented Dec 23, 2019
Maybe its just me, but I miss the quick selection color options that used to be located directly under the color wheel in the UI! Specifically, when it comes to approximating the incandescent/warm white/FastLED Fairylight color that used to be part of those 8 quick select colors. Its very difficult using the color wheel only to dial this color in just right. Is there a workaround for this or the possibility that those 8 quick-select colors might be brought back in a future build? Or better yet, maybe a way to input a FastLED color name (such as Fairylight) and have the current color (whether primary, secondary or tertiary) change to that color? Especially with effects like Twinklefox, on 0.8.6 I had it set up with both primary and secondary colors using that Fairylight color to approximate classic twinkling Christmas lights and it looked great, but using just the color wheel I can never get the two colors exactly right. Anyone have any suggestions or thoughts on this?
The text was updated successfully, but these errors were encountered:
sr1sws commented Dec 25, 2019
I cast another vote for the color “quick picks” to return! But I do like 0.9.0_b1. 😉
Author
CaptainUns commented Jan 2, 2020
Maybe a combination? It would be great to be able to enter specific hex color codes. Would there be a way to add customization the quick selection buttons? Maybe in a similar way to saving presets? Find the color you want either through the color wheel or by entering a hex color code, then save that color as one of your quick selections? There are a couple colors (i.e. Fairylight, sports team colors) that I use frequently and being able to save and quickly access those colors when programming effects would be fantastic!
sr1sws commented Jan 2, 2020 •
edited
I also like the idea of HEX or decimal for the RGB values – but if I really want to set them precisely at this time, I use the HTTP API interface.
I’ve also started “collecting” HTTP API strings with specific settings for future use. E.g. I just created one for Mardi Gras with purple and teal. I also have one for UF Gator colors – although their published color spec looks ‘bleh’ on LEDs. so I tweaked it.
I also really like the HTTP API echoing out most settings in response to the WLED command. so I can capture the RGB value of that color I selected via the color wheel.
raoulteeuwen commented Jan 2, 2020
I’ve also started “collecting” HTTP API strings with specific settings for future use. E.g. I just created one for Mardi Gras with purple and teal. I also have one for UF Gator colors – although their published color spec looks ‘bleh’ on LEDs. so I tweaked it.
Is it an idea you share those someone for others to enjoy?
sr1sws commented Jan 2, 2020 •
edited
Sure. just a string that I fire at WLED from the browser:
You can find the HTTP request codes linked in Github. These may or may not make sense for your installation. I keep these in OneNote for easy use.
One observation: I couldn’t get a save into Preset 16 (&PS=16) to work from HTTP. I know 16 is unique in being able to store segments. I just switched to preset 1, which worked. Other presets probably work too.
