Keep learning in place and at your pace with science activities and topics you can access anytime.
Which colors combined produce white
The human eye is sensitive to a narrow band of electromagnetic radiation that lies in the wavelength range between 400 and 700 nanometers, commonly known as the visible light spectrum. This small span of electromagnetic radiation is the sole source of color. All of the wavelengths present in visible light form colorless white light when they are combined, but can be refracted and dispersed into their individual colors by means of a prism.
The colors red, green, and blue are classically considered the primary colors because they are fundamental to human vision. All other colors of the visible light spectrum can be produced by properly adding different combinations of these three colors. Moreover, adding equal amounts of red, green, and blue light produces white light and, therefore, these colors are also often described as the primary additive colors.
| Interactive Java Tutorial | ||||||
| ||||||
As illustrated by means of the overlapping color circles in Figure 1, if equal portions of green and blue light are added together, the resultant color is cyan. Similarly, equal portions of green and red light produce the color yellow, and equal portions of red and blue light yield the color magenta. The colors cyan, magenta, and yellow are commonly termed the complementary colors because each complements one of the primary colors, meaning that the two colors can combine to create white light. For instance, yellow (red plus green) is the complement of blue because when the two colors are added together white light is produced. In the same way cyan (green plus blue) is the complement of red, and magenta (red plus blue) is the complement of green light.
| Interactive Java Tutorial | ||||||
| ||||||
The complementary colors (cyan, yellow, and magenta) are sometimes alternatively referred to as the subtractive primaries . This is because each one can be formed by subtracting one of the primary additives (red, green, and blue) from white light. For example, yellow light is seen when all blue light is removed from white light, magenta when green is removed, and cyan when red is removed. Consequently, when all three of the subtractive primary colors are combined, all of the additive primary colors are subtracted from white light, which results in black, the absence of all color.
Thus far this discussion has centered on the properties of visible light with respect to the addition and subtraction of transmitted visible light, which is often visualized on the screen of a computer or television. Most of what is actually seen in the real world, however, is light that is reflected from surrounding objects, such as people, buildings, automobiles, and landscapes. These objects do not produce light themselves, but emit color through a process known as color subtraction in which certain wavelengths of light are subtracted, or absorbed, and others are reflected. For instance, a cherry appears red in natural sunlight because it is reflecting red wavelengths and absorbing all other colors. The series of photographs presented below in Figure 2 helps further illustrate this concept.
In the first photograph on the left, a playing card, a green bell pepper, and a cluster of purple grapes are illuminated with white light and appear as one would expect to see them under natural lighting. In the second photograph, however, the objects are illuminated with red light. Note that the playing card reflects all of the light that strikes it, while only the grape stem and highlights on the grapes and pepper reflect the red light. The majority of the red light is being absorbed by the grapes and pepper. The third photograph shows the objects under green illumination. The different radiation wavelength causes the symbols on the playing card to appear black and the body of the card to reflect green light. The grapes reflect some green light, while the pepper appears normal, but with green highlights. The fourth photograph illustrates the objects under blue illumination. In this situation, the grape cluster appears normal with blue highlights, but the stem is invisible because it blends into the black background. The body of the playing card reflects blue light and the symbols appear black, while the pepper only reflects blue light as highlights.
| Interactive Java Tutorial | ||||||
| ||||||
The human eye can perceive very slight differences in color and is believed to be capable of distinguishing between 8 to 12 million individual shades. Yet, most colors contain some proportion of all wavelengths in the visible spectrum. What really varies from color to color is the distribution of those wavelengths. The predominant wavelengths of a color determine its basic hue , which can be, for example, purple or orange. It is the ratio of the dominant wavelengths to other wavelengths, however, that determines the color saturation of the sample and whether it appears pale or deeply saturated. The intensity of the color and reflectivity of the object being imaged, on the other hand, determine the brightness of the color, which controls, for instance, whether something appears dark or light blue.
Over the years, various classification systems have been devised to systematically express color in terms of these concepts. One of the most widely accepted has been the Munsell Color Tree , which appears below in Figure 3. As illustrated, each color in this system is represented by a distinct position on the tree. Hue color value is represented by placement on the circumference, saturation by the horizontal distance of the color from the central axis, and brightness by the vertical position on the trunk.
When learning about color, it is also important to consider pigments and dyes, which are responsible for much of the color that appears on Earth. For instance, the natural protein pigments that are contained in eyes, skin, and hair reflect and absorb light in such a way that creates a beautiful diversity of appearances in the human race. In order to achieve a similar diversity of color in inanimate objects, such as automobiles, airplanes, and houses, they are frequently coated with pigment-containing paints and portray different shades through the process of color subtraction. Printed items, such as books, magazines, signs and billboards, create colors in the same fundamental way, but through the help of dyes or inks, rather than pigments.
All color photographs, and other images that are printed or painted, are produced using just four colored inks or dyes–magenta, cyan, yellow (the subtractive primaries) and black. Mixing inks or dyes of these colors in differing proportions can produce the colors necessary to reproduce almost any image or color. The three subtractive primaries could, in theory, be used alone. However, the limitations of most dyes and inks make it necessary to add black to achieve true color tones.
When an image is being prepared for printing in a book or magazine, it is first separated into the component subtractive primaries, either photographically or with a computer as illustrated above in Figure 4. Each separated component is then made into a film that is used to prepare a printing plate for that color. The final image is created by sequentially printing each color plate, one on top of another, using the appropriate ink to form a composite that recreates the appearance of the original.
Paint is produced in a somewhat similar manner. Again, only the subtractive primaries and black are required. Base pigments containing these colors are mixed together to form the various colors used in final paint preparations.
| Color Separation Discover how the subtractive primaries are separated from an image and are made into color plates that can be used to produce realistically colored prints. |
A clear understanding of the color concepts previously discussed is extremely important when using a microscope to view and capture color images. Microscope light sources are usually tungsten-halogen bulbs that can emit a bright light with a color temperature around 3200 Kelvin. To the observer, this appears as white light that can be absorbed, refracted, reflected, polarized, and/or transmitted by a specimen on the microscope stage. The rules of primary colors apply to how the specimen interacts with microscope light and what colors are displayed as the sample is visualized in the eyepieces. The same rules also apply to the film used to capture photomicrographs.
Mortimer Abramowitz – Olympus America, Inc., Two Corporate Center Drive., Melville, New York, 11747.
Shannon H. Neaves and Michael W. Davidson – National High Magnetic Field Laboratory, 1800 East Paul Dirac Dr., The Florida State University, Tallahassee, Florida, 32310.
Which of the following combination of colour will produce white a) Green +magenta c) Yellow + red b) Cyan + blue
The correct combination of colors that produces white light is Cyan, Magenta, and Yellow. This is known as the subtractive color mixing model and is used in printing and painting. When all three colors are combined in equal amounts, they absorb all colors except for white, which is reflected back to the eye, producing the perception of white light.
Therefore, none of the given combinations (Green + Magenta, Yellow + Red, Cyan + Blue) will produce white light.
Advertisement
Advertisement
Explanation:
The combination of red, green and blue colour gives white colour. These three are known as primary colours. 1. If magenta and yellow coloured circles intersect, the intersected area will have red colour.
Advertisement
Advertisement
New questions in Physics
Find out the potential difference,if the current passing through a parallel combination of three resistor of 3 omh each is 1 ampere
5Q Name and state the rule to determine the direction of magnetic field produced by a straight for current carrying conductor ?
S₁ S X 359 M উপরের চিত্রে OM ও OS দুটি সমতল দর্পণ পরস্পর সমকোণে অবস্থিত। একটি আলোক রশ্মি OM দর্পণের সাথে 35° কোণে আপতিত হয়। দৰ্পণ কী? (৩) সমতল দর্পণে … সৃষ্ট বিশ্বের বৈশিষ্ট্য কীরূপ হবে? চিত্রে x কোণের পরিমাণ নির্ণয় কর। X OS দর্পণটিকে 15° কোণে ঘুরিয়ে OS, অবস্থানে আনলে x কোণের কীরূপ পরিবর্তন হবে তা গাণিতিকভাবে নির্ণয় কর।
Draw a labelled diagram of the apparatus one will use to demonstrate the photoelectric effect. Write down its important observations and show them gra … phically.
An object has a momentum of 55 kg m/s and hits a stationary object making the second abject start to move. if the first about ends with a moment f 13k … g m/s what is the momentum of the second object?
Museum of Science and Industry, Chicago
Providing unique experiences designed to spark scientific inquiry and creativity since 1933.
Museum hours Open today from 9:30 a.m. to 4:00 p.m. Museum hours Open tomorrow from 9:30 a.m. to 4:00 p.m.
5700 S. DuSable Lake Shore DriveChicago, IL 60637
Donate Now
See what happens when you mix together the three primary colors of light: red, green and blue.
- Black garbage bag
- Three plastic cups
- Three plastic pipettes
- Red glow stick
- Green glow stick
- Blue glow stick
- Scissors
- Plastic apron and / or gloves (optional)
Before beginning the activity, let students know that the glow-stick solution they are working with is safe, but they should still keep it away from their eyes, clothes and hands. This activity works best in a darkened room.
- Cover your work area with a black garbage bag.
- Cut open the end of each glow stick and pour each colored solution into its own cup.
- Use a pipette to take small amounts of each color and create new color combinations on the garbage bag. Because there is only a small amount of glow-stick solution, use one drop at a time to mix colors.
- What happens when you mix red and blue, or red and green, or green and blue? What happens when you mix all three colors together?
What’s happening?
If you look inside a computer or TV screen, you’ll see they contain only three colors of light: red, green and blue. The three specific cone cells in our eyes work together, allowing us to translate these three colors of light into millions of different colors.
When red and blue light are combined, the result is magenta. When green and blue light are combined, they make cyan. Red and green light make yellow. And when all three primary colors of light are combined, we see white light.
Subscribe to our newsletter
